SiC & MoSi₂ Heating Elements for Industrial Furnaces Worldwide Supply • Custom Specifications • Export Support
Home  /  Blog  /  Technical

U-Shaped SiC Heating Elements with Bottom Terminals

Technical Published 2 October 2026 3 min read 81 views
U-Shaped SiC Heating Elements with Bottom Terminals

U-Shaped SiC Heating Elements with Bottom Terminals

U-shaped SiC heating elements are specialized silicon carbide heating rods designed for high-temperature industrial furnaces, ceramic kilns, sintering furnaces and heat treatment equipment. This configuration combines two parallel silicon carbide heating legs into one U-shaped element, with the electrical terminals positioned at the bottom for convenient furnace connection.

We supply customized U-shaped silicon carbide heating elements according to required diameter, heating length, leg spacing, terminal configuration, resistance, voltage and power.

What Is a U-Shaped SiC Heating Element?

A U-shaped SiC heating element is manufactured from high-temperature silicon carbide and formed into a U-shaped configuration. The two heating legs are connected at the upper section, while the electrical connection points are located at the lower end.

This design allows both electrical terminals to remain on the same side of the furnace, which can be useful when the furnace structure requires a specific terminal arrangement.

U-Shaped Silicon Carbide Heating Element Design

The U-shaped construction consists of two parallel heating sections connected at one end. The opposite ends are used for electrical connection.

Depending on the furnace design, important dimensions include:

  1. SiC element diameter
  2. Heating zone length
  3. Cold-end length
  4. Overall element length
  5. Distance between the two heating legs
  6. U-shaped bend dimensions
  7. Terminal configuration
  8. Electrical resistance
  9. Operating voltage
  10. Required power

Applications of U-Shaped SiC Heating Elements

U-shaped silicon carbide heating elements are suitable for many high-temperature heating applications, including:

  1. Industrial electric furnaces
  2. Ceramic firing kilns
  3. Sintering furnaces
  4. Heat treatment furnaces
  5. Powder metallurgy furnaces
  6. Laboratory furnaces
  7. Glass processing equipment
  8. Electronic material processing
  9. Advanced ceramic production
  10. High-temperature testing equipment

Advantages of U-Shaped SiC Heating Elements

  1. Compact U-shaped design: Two heating legs are integrated into one element.
  2. Bottom electrical terminals: The terminal arrangement can simplify connection in suitable furnace designs.
  3. High-temperature heating: Silicon carbide is widely used for demanding furnace applications.
  4. Efficient installation: The two-leg configuration can reduce the number of separate heating elements required in some furnace designs.
  5. Custom dimensions: Leg spacing, heating length and overall dimensions can be customized.
  6. Replacement applications: Suitable for replacement of specially shaped SiC heating elements.

How to Select a U-Shaped SiC Heating Element

Correct selection requires both mechanical dimensions and electrical specifications.

Before ordering, confirm the following information:

  1. Heating element diameter
  2. Heating zone length
  3. Cold-end length
  4. Overall length
  5. Distance between the two legs
  6. U-shaped bend dimensions
  7. Terminal dimensions
  8. Resistance
  9. Voltage
  10. Power
  11. Furnace operating temperature
  12. Furnace atmosphere

For replacement applications, providing a photograph, technical drawing or dimensions of the original element can help ensure the replacement matches the existing furnace installation.

U-Shaped SiC Heating Elements for Furnace Replacement

When replacing a U-shaped silicon carbide heating element, matching only the overall length is not enough. The rod diameter, heating zone, cold ends, leg spacing, electrical resistance and terminal arrangement should also be considered.

We can manufacture replacement U-shaped SiC heating elements according to an existing sample, technical drawing or customer specifications.

Custom U-Shaped Silicon Carbide Heating Elements

Different furnace manufacturers use different heating element dimensions and electrical configurations. Our U-shaped SiC heating elements can be customized according to the customer's furnace requirements.

Customers can send us:

  1. Existing heating element drawings
  2. Element dimensions
  3. Photos of the existing SiC element
  4. Voltage and power information
  5. Resistance information
  6. Furnace specifications
  7. Required quantity

Based on these specifications, we can check the appropriate U-shaped SiC heating element configuration for the application.

U-Shaped SiC Heating Element Supplier

We supply silicon carbide heating elements for industrial furnace manufacturers, furnace distributors, maintenance companies and end users.

Our SiC heating element range includes straight rods, U-shaped elements and other customized configurations for high-temperature furnace applications.

If you are looking for a U-shaped SiC heating element supplier, send us your drawing, dimensions or existing heating element sample for quotation.

Request a Quote for U-Shaped SiC Heating Elements

Need a replacement or custom U-shaped silicon carbide heating element?

Send us the required diameter, heating length, leg spacing, voltage, power and resistance, or simply send a photograph and drawing of your existing element.

We can supply customized U-shaped SiC heating elements with bottom terminals for industrial furnaces, ceramic kilns, sintering equipment and high-temperature processing systems.

Contact us for a quotation for U-shaped SiC heating elements and custom silicon carbide heating rods.

  1. SiC Heating Elements
  2. Equal Diameter SiC Heating Rods
  3. U-Type Right-Angle SiC Heating Rods
  4. Threaded SiC Heating Rods
  5. Industrial Heating Elements


Related articles

← All articles