1. SiC Silicon Carbide Heating Elements

SiC Heating Element
Silicon carbide heating element for high-temperature electric furnace service.

SiC Heating Rod
Standard straight heating-rod configuration. Special specifications can be manufactured according to customer requirements.
SiC Product Model
| Model | Diameter | Length | Model designation |
|---|---|---|---|
| DL 16 / 400 / 805 / 2.2 | 16 mm (0.63 in) | 400 mm hot-zone length / 805 mm overall dimension as supplied | DL 16 / 400 / 805 / 2.2 |
SiC Physical & Electrical Properties
| Property | Source value | US / international reference |
|---|---|---|
| Density | ≥ 2.6 g/cm³ | ≥ 162.3 lb/ft³ |
| Porosity | 18–20% | 18–20% |
| Flexural strength | ≥ 50 MPa | ≥ 7,252 psi |
| Hardness | Mohs 9.8 | Mohs 9.8 |
| Thermal expansion coefficient | 4.8 × 10⁻⁶ K⁻¹ | 4.8 × 10⁻⁶ K⁻¹ |
| Specific heat | 0.183 kcal/kg·°C | ≈ 0.183 Btu/lb·°F |
| Thermal conductivity | 0.0365 source unit | Source unit retained |
| Hot-zone resistivity at 1050°C | 700–1500 Ω·mm²/m | ≈ 0.000213–0.000457 Ω·in²/ft |
| Cold-end resistivity at 20°C | 18–24 Ω·mm²/m | ≈ 0.00000549–0.00000732 Ω·in²/ft |
| Emissivity | 0.9 | 0.9 |
ED Type nominal loading condition: 1050°C (1922°F). Resistance tolerance in the supplied table: ±20%. Voltage, power and resistance are the values specified for each individual element size.
ED Type SiC Heating Element Dimensions — 12 to 16 mm

ED Type SiC Heating Element Dimensions — 20 to 35 mm

ED Type SiC Heating Element Dimensions — 38.1 to 44.4 mm

ED Type SiC Heating Element Dimensions — 50 and 54 mm

2. MoSi₂ Molybdenum Disilicide Heating Elements

Grade 1700 U-Type — 6/12 mm
MoSi₂ heating element configuration from the supplied technical specification.

Grade 1700 U-Type — 9/18 mm
MoSi₂ heating element configuration from the supplied technical specification.
MoSi₂ Physical Properties
| Property | Source value | US / international reference |
|---|---|---|
| Density | 5.6 g/cm³ | ≈ 349.6 lb/ft³ |
| Flexural strength | ≥ 1.5 kg/cm² | ≥ 21.3 psi |
| Vickers hardness (20°C) | 1200 kg/cm² | ≈ 17,068 psi |
| Porosity | 7.4% | 7.4% |
| Water absorption | 1.2% | 1.2% |
| Hot elongation | 4–5% | 4–5% |
Maximum Element Temperature by Furnace Atmosphere
| Furnace atmosphere | Maximum element temperature | US equivalent |
|---|---|---|
| NO₂, O₂, air | 1800°C | 3272°F |
| He, Ar, Ne | 1750°C | 3182°F |
| SO₂ | 1700°C | 3092°F |
| CO₂, N₂ | 1600°C | 2912°F |
| Humid air | 1500°C | 2732°F |
| H₂ | 1450°C | 2642°F |
MoSi₂ Electrical / Installation Data
| Item | Technical data from supplied material |
|---|---|
| 6/12 mm element long-term current reference | Not for long-term use at 170 A |
| 9/18 mm element long-term current reference | Not for long-term use at 300 A |
| Element-to-furnace-bottom distance | Not less than 25 mm |
| Voltage at clamp connection | Less than 0.1 V |
| Lower clamp end to furnace roof | Not less than 50 mm |
| Small furnace below 100 kW, 20–150°C | 1/3 working voltage |
| Small furnace below 100 kW, 150–500°C | 1/2 working voltage |
| Small furnace below 100 kW, 500°C to working temperature | Full working voltage |
| Large furnace 100–500 kW, 200–300°C | 1/3 working voltage |
| Large furnace 100–500 kW, 300–700°C | 1/2 working voltage |
| Large furnace 100–500 kW, 700°C to working temperature | Full working voltage |
Grade 1700 U-Type — 6/12 mm Complete Technical Lookup Data

Grade 1700 U-Type — 9/18 mm Complete Technical Lookup Data

MoSi₂ Surface Load and Electrical Characteristics
